Meaning
Performance metrics of heterodyne receivers quantify the ability of the system to suppress unwanted signal power at the image frequency relative to the desired signal. This suppression factor is the image rejection ratio, which is expressed in decibels and indicates how well the mixer or architecture rejects the image band. The metric determines whether an unwanted signal at the mirror frequency will corrupt the downconverted signal of interest.
High-performance transceivers require a high ratio to operate reliably in crowded spectrum environments.
Architecture Influence
Dual-conversion receivers and image-reject architectures, such as the Hartley or Weaver architectures, rely on phase cancelation to eliminate the image signal. The image rejection ratio in these designs is highly dependent on the amplitude and phase matching of the in-phase and quadrature signal paths. A phase imbalance of even a few degrees can degrade the rejection ratio from fifty decibels down to less than thirty decibels, causing interference.
Phase Calibration
Digital algorithms estimate and correct for mismatches in the quadrature receiver branches. This correction improves the image rejection ratio dynamically during operation.
Factory Verification
Measuring the parameter requires a signal generator that can sweep across both the desired channel and the image channel frequencies. The image rejection ratio is computed by taking the difference in receiver response between the two input frequencies. Production testing ensures that the receiver meets its minimum specification across all channels before the module is approved for shipping.
In continuous-wave testing, the ratio must exceed the minimum requirements defined by the communication standard to ensure reliable link quality.