Meaning
Time delay difference between the two complementary signals running along a differential transmission line arises from physical length mismatches or dielectric inconsistencies. This intra pair skew degrades signal quality by converting differential-mode energy into common-mode noise, which increases electromagnetic radiation. It limits the maximum data rate of high-speed digital buses such as PCI Express and Ethernet.
Designers minimize this effect by routing both traces with identical geometries and using tightly woven board substrates.
Physical Routing
Trace length matching is the primary technique used to control the arrival time of differential signals. When routing bends, layout engineers add compensation curves to minimize intra pair skew. This prevents common-mode noise.
Material Impact
Glass fiber weave patterns within the printed circuit board substrate introduce localized dielectric variations that cause signal speed differences. This contribution to intra pair skew occurs when one trace of the differential pair runs directly over a glass bundle while the other runs over a resin-rich area. Utilizing spread glass fabrics reduces these local variations by providing a more uniform dielectric environment.
Verification Method
High-speed digital oscilloscopes measure the difference in rise times between the positive and negative signals of the differential pair. If the measured intra pair skew exceeds the budget allocated by the interface standard, the link may suffer from increased jitter and bit errors. This measurement confirms the physical routing quality of the assembled board.