Meaning
Determination of the moisture levels in plastics is critical for evaluating the long-term structural and electrical performance of molded enclosures. The standard ISO 62 water absorption describes the laboratory procedures used to measure the amount of moisture absorbed by plastic specimens when immersed in water or exposed to humid environments. This test establishes baseline behavior for engineering polymers under specified thermal conditions.
Test Procedure
Specimen preparation requires drying the plastic at an elevated temperature before immersion in distilled water at twenty degrees Celsius. The sample is weighed at regular intervals to construct an absorption curve until the mass stabilizes, denoting saturation.
Material Degradation
Moisture absorption changes the physical and electrical properties of polymer housings by causing swelling and localized softening. Elevated water content reduces the dielectric strength of the material, increasing risk of electrical leakage or signal attenuation in high-frequency applications.
Design Relevance
Enclosure designers use these certified measurements to select polymers that maintain dimensional tolerance and insulating properties in humid climates. For outdoor radio modules, selecting a material with very low moisture absorption ensures that the housing does not degrade or allow water ingress over years of exposure. This careful selection prevents catastrophic failures of internal circuitry caused by material swelling or degradation.