Meaning
The guidance document known as KDB 594280 D02 defines the technical procedures for evaluating modular transmitters under the rules of the Federal Communications Commission. Regulatory compliance relies on this framework when a radio module integrates into a host product without a full recertification of the entire assembly. Separate modular grants require specific testing methods to verify that radio frequency emissions remain within statutory limits during simultaneous transmission modes.
Radio testing laboratories and equipment manufacturers apply the directive to establish compliance boundaries for intentional radiators.
Modular Integration
Host integration presents several mechanical and electrical hurdles that the testing protocol addresses through explicit verification limits. Component manufacturers supply modules with predetermined antenna configurations, whereas integrators must ensure that physical enclosure changes do not alter radio frequency characteristics. Power supply variations inside the host device can introduce conducted spurious emissions that invalidate the original grant unless the integration follows the prescribed evaluation path.
Physical spacing between multiple transmitters inside a shared chassis dictates whether simultaneous transmission testing becomes mandatory under the rule.
Compliance Verification
Laboratory technicians execute radiated spurious emission tests while the module operates inside the final host enclosure at maximum power settings. Test setups require specific firmware loads that command the radio to hop across low, middle and high channels continuously during measurement sweeps. Documentation packages submitted to certification bodies must include data plots showing compliance across all operational bands supported by the hardware.
Failure to record margin levels against the applicable limit during these tests halts the certification filing until physical shielding or software power reduction corrects the emission profile.
Grant Condition
Final market entry for the finished electronic product depends entirely on adherence to the operational restrictions detailed in the modular approval documentation. Deviations from the approved antenna type or maximum gain rating void the permissive change allowances granted under the regulatory framework. Market surveillance authorities routinely audit commercial devices to confirm that integrated radio modules match the configuration evaluated during the initial certification process.
Proper adherence to the protocol protects manufacturers from regulatory penalties and ensures that multi radio systems operate without causing harmful interference to licensed spectrum users.