Meaning
Mathematical formulations derived from the Kohlrausch relation establish an analytical relationship between the maximum temperature at a closed electrical contact interface and the electrical voltage drop measured across that constriction. By linking thermal conduction and electrical conduction through the Wiedemann-Franz-Lorenz law, the equation demonstrates that contact super-temperature depends solely on the potential drop across the contact resistance, independent of contact geometry or scale. The formula applies universally to metallic electrical contacts in separable connectors, busbars, switches, and relay interfaces operating under steady-state direct current.
It stops applying to interfaces governed by high-frequency alternating current skin effects, semiconductor barrier junctions, or insulating tunnel junctions where classical metallic electron conduction breaks down.
Physical Mechanism
Current passing through an electrical connector constricts through microscopic metallic contact spots, generating localized Joule heat directly at the physical interface. The kohlrausch relation equates this localized electrical dissipation to heat conduction flowing away through the contact members, producing the expression where interface temperature squared minus bulk ambient temperature squared equals contact potential squared divided by four times the Lorenz constant. Microscopic contact spots reach thermal equilibrium within microseconds due to their minute thermal mass.
The relationship proves that contact constriction voltage serves as a direct thermodynamic probe of peak interface temperature. If the voltage drop across a copper or gold interface rises to eighty to one hundred millivolts, the contact asperities reach the softening temperature of the metal, causing mechanical creep and enlarging the real contact area.
Voltage Thresholds
Critical physical transitions across metallic contact interfaces correspond to precise, predictable contact voltage thresholds. Softening occurs at low voltages, followed by melting when the voltage across the interface climbs higher, reaching approximately four hundred millivolts for copper and three hundred millivolts for tin. Further voltage elevation triggers boiling and arc formation, resulting in contact pitting, welding, and material transfer.
Power distribution connectors and battery pack disconnect switches experience severe thermal degradation if high contact resistance drives the constriction voltage past the softening threshold under peak current loads. Engineers design high-current separable interfaces with normal forces and contact geometries that hold constriction voltage below forty percent of the softening limit under continuous duty.
System Validation
Electrical validation suites for high-power connectors incorporate voltage drop monitoring across terminal pairs under step-stress current tests. Millivolt readings recorded during qualification trials identify whether contact points remain well within their safe, unsoftened elastic regime or risk thermal runaway. Quality handover sheets cite measured terminal voltage drops alongside ambient temperatures to verify compliance with contact safety margins.
Verifying that operational constriction drops stay safely beneath calculated softening voltages guarantees that mechanical spring pressure will not cause contact collapse or interface welding during overcurrent transients.