Meaning
A signal processing operation in chirp spread spectrum receivers translates a continuously varying frequency sweep into a single stationary tone. Demodulators apply lora de-chirping by multiplying the incoming signal with a locally generated reference chirp that has the opposite frequency slope. The multiplication compresses the wideband spread spectrum signal back into a narrowband frequency component, concentrating the signal energy for extraction.
Mathematical Multiplication
Mathematical Multiplication combines the incoming received chirp with a down-chirp or an up-chirp depending on the transmission phase. The multiplication adds the opposing phase variations together, which cancels the quadratic phase over the duration of the symbol. Processing yields a sinusoidal signal whose frequency directly corresponds to the data value carried by the original chirp symbol.
System performance depends heavily on the accuracy of the local oscillator when generating this reference waveform.
Fourier Transformation
Discrete Fourier transform algorithms process the resulting stationary tone to identify the peak energy bin in the frequency domain. The bin index containing the maximum power reveals the specific symbol value transmitted by the node. High-noise environments may cause secondary peaks, but the concentration of energy achieved by the previous step ensures that the true peak remains detectable.
Converting from the time domain to the frequency domain completes the demodulation process for each symbol.
Link Margin
Noise rejection is the primary benefit of this spread spectrum processing technique. By distributing the signal energy over a wide bandwidth and then reconcentrating it, the receiver can successfully decode signals that lie several decibels below the thermal noise floor. The decoding gain enables long-range transmission with very low output power.