Meaning
Voltage drop phenomena in lithium-ion chemistries occur when internal resistance increases during operation in sub-zero environments. A condition known as low temperature cell sag manifests when the terminal voltage of a battery falls sharply under load because the electrolyte becomes less conductive. This effect is temporary and typically reverses once the battery warms up through internal heating or ambient changes.
It defines the lower operating boundary for outdoor electronics and determines the necessity of thermal insulation.
Voltage Threshold
Electronic modules often have a minimum input requirement to maintain stable operation. If low temperature cell sag pushes the battery output below three volts, the onboard regulator may fail. This leads to unexpected system restarts in winter conditions.
Internal Resistance
Chemical reactions inside the cell slow down as the temperature falls towards the freezing point. The resulting low temperature cell sag is not a loss of capacity but a limitation on how fast energy can be extracted. High-discharge cells are designed with additives to minimize this resistance.
Discharge Rate
Heavy loads exacerbate the drop in potential. A small sensor may ignore the effects of low temperature cell sag until the radio turns on to transmit. Managing the peak current is the only way to prevent a brownout when the environment is cold.