Meaning
Power standard defined by the Third Generation Partnership Project specifies a maximum output power of twenty-three decibel-milliwatts for cellular internet of things devices. Adhering to the lte-m class 3 specification allows modules to achieve reliable long-range uplink connectivity while operating within the thermal and current limits of small battery-powered terminals.
Power Standard
Maximum transmit power of twenty-three decibel-milliwatts represents the standard level for traditional mobile handsets. Incorporating the lte-m class 3 standard in compact modules enables deep coverage into buildings and underground basements where signals are heavily attenuated. This power capability is essential for smart utility meters and security sensors deployed in challenging environments.
Range Impact
In contrast to lower power classes, the higher output of this category extends the link budget to ensure reliable messaging over long distances. This lte-m class 3 configuration achieves a balance between cell coverage area and battery longevity by using narrow-bandwidth transmissions. The concentrated energy profile enables the signal to rise above the noise floor at the base station.
Module Evaluation
Designers must verify that the peak power consumption does not trigger a battery brownout during long transmission cycles. A certified lte-m class 3 terminal undergoes rigorous tests to ensure it meets the out-of-band emissions limits at its maximum rated power. This testing verifies that the RF front-end holds enough decoupling capacitance to sustain the high-power pulses without dropping the internal voltage rails below the transceiver’s minimum limit.
It also ensures that the thermal dissipation from the power amplifier is managed properly by the board layout to avoid hot spots.