Meaning
Amplitude transfer nonlinearity represents a fundamental limitation in high frequency power amplifiers where output power deviates from a linear relationship with input power. This non-constant gain response, known as am-am distortion, degrades the signal quality in transmitter systems that employ non-constant envelope modulation schemes.
Signal Degradation
Transmitter performance suffers when non-constant envelope waveforms pass through a non-linear power amplifier. The am-am distortion compresses the outer peaks of the modulation constellation, which increases the error vector magnitude. Consequently, out-of-band emissions rise, often causing the device to fail adjacent channel leakage ratio requirements during certification.
Compensation Method
Digital predistortion operates as the primary technique to linearize the amplifier by applying an inverse transfer function to the digital baseband signal before digital-to-analog conversion. This pre-emphasis cancels the compression introduced by am-am distortion, restoring linear operation up to the saturation point of the active device. Hardware designers calibrate these coefficients during factory testing to match the specific thermal and voltage conditions of the RF assembly.
In multi-carrier modules, this calibration must run across several frequencies to prevent memory effects from degrading the correction quality over wide bandwidths.
Performance Limit
Power amplifier saturation defines the absolute boundary where digital correction loses its effectiveness. As the input power increases beyond a certain threshold, the device can no longer supply additional output current, rendering further digital compensation useless. System engineers must therefore balance the output power level against the available power-added efficiency.