Meaning
The electric current consumed by a cellular modem operating on long-term evolution for machines networks during various operational phases governs the overall battery life of IoT hardware. Understanding LTE-M current draw allows developers to calculate the exact power budget for battery-operated devices. This metric varies by orders of magnitude between deep sleep states, active reception, and high-power radio transmissions.
The scope of this measurement spans the modem’s power supply pins during active and passive states, and it terminates at the boundaries of the non-RF system components like sensors and microcontrollers.
Measurement Sequence
Power profiles are captured during active communication sessions to map out the power consumption of each phase. A typical transmission cycle includes waking from sleep, searching for a cell tower, performing the handshake, sending the payload, and waiting for a downlink response. The LTE-M current draw reaches its maximum value during the transmission phase, when the power amplifier is active.
Precise current-sense resistors and high-speed digitizers are required to capture these brief microsecond peaks.
Network Factor
Cellular network configuration parameters heavily influence the duration and intensity of these power cycles. Features such as power saving mode and extended discontinuous reception permit the modem to sleep for hours while remaining registered on the network. Without these features, the modem must constantly search for towers, which increases the average current draw and drains the battery within days.
Network signal quality also dictates the transmission power, where poor signals force the modem to consume more current to complete the transmission.
Device Optimization
Hardware engineers select low-leakage power regulators to minimise standby energy losses. Using a high-efficiency buck converter instead of a linear regulator reduces the energy wasted as heat during active transmission peaks. These hardware selections are verified during compliance testing to guarantee the target battery life is achievable.