Meaning
Maximum allowable physical deformation of structural parts, measured in parts per million, ensures the dimensional accuracy of a metrology system. These microstrain limits define the boundary where mechanical bending starts to corrupt the coordinate readings of the probe. Designers use these thresholds to size the cross-sections of the moving members.
Structural Integrity
Forces applied by motors during rapid moves must never flex the carriage beyond these levels. When these values are exceeded, the structural frame fails to return to its original shape. Rigid design practices prevent this permanent deformation by distributing the load evenly.
Accuracy Boundary
Exceeding these displacement targets introduces geometric errors that cannot be corrected by software. Calibration assumes that structural distortion remains within a predictable elastic range. When forces push the frame past these limits, the coordinate calculations lose their validity.
Material Threshold
Mechanical properties determine how much stress a material can withstand before exceeding these microstrain limits. Carbon fibre composites offer high stiffness-to-weight ratios that keep the deformation low during fast moves. Engineers select these materials to maintain structural stability under high acceleration loads.
Using these advanced structures allows the machine to operate at maximum speed without compromising the dimensional integrity of the measurements.