Meaning
Geometrical trace layouts define the arrangement of a signal conductor placed above a single ground plane with a dielectric layer between them. The microstrip cross section determines the characteristic impedance and electromagnetic field distribution of the transmission line. It is a fundamental building block for surface routing on high frequency boards.
Impedance Control
Trace width and dielectric thickness are the primary variables that set the electrical behavior. A microstrip cross section also includes the thickness of the copper and the properties of the solder mask. Changes in these dimensions directly affect the propagation velocity of the signal.
Fabrication Tolerance
Fabricators adjust the etching process to maintain a target resistance and inductance per unit length. Maintaining a consistent microstrip cross section ensures that signals do not reflect at transitions between different board regions. Test coupons are used to verify these dimensions after the board is pressed.
Signal Loss
Signals on the surface radiate more easily than those buried between two planes. The microstrip cross section makes these traces more sensitive to external interference and potential crosstalk. Shielding or increased spacing is required when routing sensitive RF lines near the board edge.
Because one side of the conductor is exposed to air or solder mask, the effective dielectric constant is lower than in a stripline. This result is a faster signal but higher electromagnetic emission.