Meaning
High-density interconnect printed circuit boards utilize tiny laser-drilled copper connections to link adjacent conductive layers. An electrical open circuit known as microvia failure occurs when these small interconnects fracture or separate under thermal stress. This defect often appears late in the assembly process, causing expensive board scrap.
Stress Profile
Cyclic expansion of the board during soldering or operation creates high tensile stresses in the copper deposit. The FR4 substrate expands much faster in the vertical axis than the copper microvia itself. This differential expansion pulls on the microvia wall, leading to mechanical fatigue and crack initiation.
Structural Weakness
Inadequate cleaning of the inner layer copper target pad prevents the formation of a continuous metallic bond. If chemical residues remain from the laser ablation process, they form a weak interface that easily detaches during subsequent reflow. Electroplating defects such as thin copper deposition or voids in the via fill also compromise structural integrity.
Inspection Protocol
Traditional electrical testing often fails to detect latent cracks that only open at elevated temperatures. Engineers use continuous resistance monitoring during thermal cycling to catch these transient open circuits. Microsection analysis remains the definitive method to inspect the internal structure and verify grain structure alignment at the interface.
This laboratory examination exposes sub-micron gaps and confirms whether the plating adheres to the base layer.