Meaning
Validation procedures for radio frequency power density limits under human presence conditions govern high-frequency wireless device approval. Mmwave proximity compliance measures and verifies that devices operating above 24 gigahertz restrict electromagnetic field exposure to safe thresholds when operated near human tissue. The process sets testing protocols, backoff algorithms, and sensor trigger ranges for millimeter-wave mobile devices.
It stops applying to devices operating below 6 gigahertz or low-power equipment categorically exempt from exposure assessments.
Power Density
Incident power density replaces specific absorption rate as the governing physical metric above 6 gigahertz. Near-field planar scanners compute power flux density across small evaluation areas, ensuring compliance with international limits such as 10 watts per square meter. Advanced millimeter-wave modules utilize active beamforming arrays that concentrate energy, requiring localized spatially-averaged power density measurements.
Calibration fixtures ensure field probes yield accurate spatial readings within millimeter-scale separation distances.
Detection Verification
Automated proximity sensor testing verifies that RF transceivers drop transmit power upon target detection. Test setups position human-equivalent tissue models at variable distances from antenna modules, tracking power reductions over time. If a sensor fails to register proximity within specified physical zones, the module fails compliance due to excessive local exposure.
Testing also confirms that recovery to full power occurs smoothly when targets move away.
Certification Boundary
Regulatory filings require full measurement reports covering every antenna array orientation and power step. Compliance parameters must be demonstrated across worst-case thermal and battery supply voltage ranges.