Meaning
In-plane sliding fracture kinematics describe crack surface displacement where opposing crack faces slide relative to each other parallel to the crack propagation direction. Evaluating mode ii shear failure characterizes interface toughness in composite laminates, adhesive bonds, and solder joint connections subjected to transverse mechanical loads. Analysis applies to sliding shear fractures and excludes out-of-plane opening or tearing modes.
Shear Loading
Transverse mechanical stresses generate parallel friction forces along internal material boundaries. Susceptibility to mode ii shear increases when thermal expansion mismatch forces printed circuit board sub-assemblies to warp under environmental temperature swings. Sliding friction between internal crack faces modifies local stress intensity factors.
Frictional contact dissipates strain energy.
Interface Fracture
Crack propagation driven by sliding forces occurs along weak material boundaries rather than through bulk dielectrics. Under mode ii shear conditions, micro-cracks coalesce ahead of the main crack tip, forming shear bands that degrade structural integrity prior to total interface separation. Delamination spreads rapidly along metal-polymer interfaces when shear stress reaches critical levels.
Delamination reduces mechanical shear strength.
Mechanical Testing
Standardized test procedures use end-notched flexure coupons to measure shear fracture resistance under three-point bending loads. Evaluating material responses under mode ii shear requires precise tracking of crack tip displacement to calculate critical energy release rates according to ASTM D7905 guidelines. Engineering qualification sign-offs compare measured interlaminar shear strength against system thermal-mechanical requirements before approving multi-layer board stackups for production volume manufacturing.
Structural reliability depends on bondline shear performance.