Meaning
Dosimetric evaluations measuring localized radio frequency energy absorption across two or more operational frequency bands determine personal device exposure compliance during concurrent or sequential transmissions. A multi-band sar assessment evaluates energy dissipation per unit mass in human tissue when a device transmits across cellular, local area, and personal network frequencies. Measurements take place within standardized anatomical phantoms filled with tissue-simulating liquids calibrated to specific dielectric permittivity values.
Testing stops applying when device transmit power falls beneath categorical exclusion limits or when operating distances exceed twenty centimeters from the human body.
Dosimetric Summation
Combining localized energy values requires mapping volumetric coordinate grids across differing operational wavelengths. A multi-band sar calculation calculates the peak spatial-average absorption by scaling and summing spatial matrices from each discrete transmitter configuration. If peak absorption locations for separate frequency bands align physically on the device surface, local energy levels concentrate, narrowing safety margins.
When hotspots land at physically distant locations on the chassis, cumulative exposure values distribute safely across the phantom surface. Automated measurement systems locate maximum electric field intensities and integrate the results over standardized one-gram or ten-gram tissue cubes.
Chassis Grounding
Structural design choices within a mobile device dictate how high-frequency currents circulate across shared ground planes and outer metallic bands. When designing for multi-band sar compliance, engineers tune ground paths to disperse currents, preventing current pooling adjacent to human tissue contact areas. Ferrite suppressors and high-frequency decoupling capacitors placed along board boundaries attenuate stray energy without degrading active antenna radiation patterns.
Enclosure thickness and dielectric materials directly influence the separation distance between internal radiating elements and the external plastic face.
Laboratory Sequence
Testing protocols follow strict procedures outlined by international standards organizations and government telecommunications commissions. Calibrated robotic arms drive miniature isotropic electric-field probes through liquid-filled phantoms to record three-dimensional field volumes. Peak measurements yield a composite multi-band sar compliance report that specifies operating modes, battery configurations and chassis orientations.
These verified dossiers form a mandatory section of the final regulatory product submission required prior to commercial retail sale.