Meaning
Small magnetic antennas detect localized electromagnetic emission sources on a printed circuit board during the debugging phase. A near-field loop probe senses the magnetic field lines generated by high-frequency currents flowing through traces or components. The sensitivity of the measurement is bounded by the physical size of the loop and the distance to the source.
Spatial Resolution
Smaller loops provide higher spatial resolution but exhibit lower sensitivity to weak electromagnetic fields. Using a near-field loop probe with a diameter of a few millimeters allows developers to pinpoint the exact pin or trace that is radiating noise. This localized measurement is necessary before implementing shielding or filtering changes.
Magnetic Coupling
The probe operates on the principle of Faraday’s law of induction, where a changing magnetic field induces a voltage in the loop. When the near-field loop probe is held parallel to a trace, the magnetic flux coupling is maximized, providing the strongest signal on the spectrum analyzer. Rotating the probe helps identify the direction of current flow on the board.
This directional response is a valuable diagnostic tool for board-level troubleshooting.
Frequency Response
Calibration of these measurement tools is necessary to ensure that the measured voltage can be converted to magnetic field strength. The frequency response of a near-field loop probe determines the range of signals that can be accurately characterized. Most probes are optimized for frequencies ranging from a few megahertz to several gigahertz.