Meaning
Regulatory provisions that allow low-power wireless devices to bypass expensive physical specific absorption rate testing expedite the market entry of wearable devices. The near field SAR exemption is granted when the transmitter output power is below a calculated threshold that depends on the distance from the human body and the operating frequency. This exemption is defined by telecommunications bodies to focus testing resources on devices that pose a greater risk of exceeding exposure limits.
Power Calculation
Determining eligibility for this status requires comparing the maximum conducted or radiated power of the device against the frequency-dependent threshold. If the maximum power of the device is below this limit, it qualifies for the near field SAR exemption. Designers must document this calculation in the regulatory compliance report, using the maximum antenna gain and the worst case transmission duty cycle to prove that the device is safe.
Separation Distance
The separation distance between the radiating antenna element and the skin of the user is a critical parameter in the exemption formula. For body-worn accessories, this distance is often measured in millimeters, and even small changes can affect eligibility. If a device has a five-millimeter separation, the power threshold is much lower than if it has a ten-millimeter separation.
Product designers must design the mechanical enclosure to maintain this separation distance, preventing accidental close contact that would invalidate the exemption.
Certification Advantage
Qualifying for this exemption reduces the testing time and cost required for product certification. Avoiding laboratory measurements on human-equivalent phantoms can save weeks of development time.