Meaning
Protective housing designed to shield internal components from dust and physical impact without providing an airtight or gastight seal. A non-hermetic enclosure allows for the exchange of air and moisture between the internal environment and the outside atmosphere. Protective packaging of this type is common for consumer electronics and industrial sensors where cost and weight are prioritized over total environmental isolation.
Manufacturing relies on conformal coatings or potting compounds to protect sensitive circuit boards from humidity.
Moisture Management
Diffusion of water vapor through seals is a constant factor. Because a non-hermetic enclosure does not prevent humidity ingress, components must be rated for moisture.
Thermal Exchange
Heat dissipation is frequently easier to manage when the housing is not perfectly sealed. Natural or forced convection within a non-hermetic enclosure helps to move heat away from high power components like processors or radio power amplifiers. Airflow paths must be carefully sized to prevent the entry of insects or large debris while maximizing thermal dissipation.
Testing Standard
Evaluation of these housings typically involves ingress protection ratings that define the resistance to solid objects and liquid splashes. A non-hermetic enclosure might achieve an ip65 rating which indicates protection against dust and low pressure water jets. Standard housings will not pass the immersion tests required for hermetic systems.
Engineering teams use accelerated aging tests in high humidity chambers to verify that the internal protection measures are sufficient for the intended service life.