Meaning
Electrical transport behavior that deviates from Ohm’s law occurs when the current through a junction does not vary in direct proportion to the applied voltage. This phenomenon, known as non-linear conductance, often arises at loose metal-to-metal interfaces or corroded connections. It generates spurious RF signals when multiple transmit frequencies pass through the compromised junction.
Intermodulation Generation
When high-power signals encounter non-linear conductance, they generate intermodulation distortion products. These unwanted signals can fall directly into the sensitive receive bands of a base station or terminal. This degradation masks weak incoming signals, which lowers the data rate and causes packet loss.
Material Prevention
Corrosion and oxidation are the primary causes of these non-linear behaviors in RF connectors and antenna feeds. Designers utilize high-grade metals and torque-controlled connections to prevent the oxide layers that act as microscopic diodes. Preventing non-linear conductance requires maintaining clean, high-pressure contact areas across all conductive paths, and this prevents the formation of metal-insulator-metal junctions.
Interface Testing
Technicians measure this effect by sending high-power carrier signals through the RF path and analyzing the returned frequencies. A high level of intermodulation products indicates a faulty connection. This test represents a standard quality gate during factory testing.