Meaning
Unpredictable changes in electronic component output values do not scale proportionally with temperature variation. Sensor circuits suffer from non-linear thermal drift when their internal silicon junctions experience thermal gradients. This behavior complicates the task of analog signal conditioning.
The shift requires multi-point calibration to correct.
Compensation Curve
Higher-order polynomial functions must be programmed into the system microcontroller to correct for these non-uniform shifts. To mitigate non-linear thermal drift, engineers measure the device output across a range of temperature setpoints. This data is used to calculate correction coefficients.
Dynamic calculations then adjust the reading based on an on-board temperature sensor.
Silicon Behavior
Semiconductor physical properties change in complex ways because carrier mobility and bandgap energy have complex temperature coefficients. Consequently, non-linear thermal drift is most severe in high-gain amplification stages and reference voltage generators. This drift can cause sudden, unexpected steps in precision ADC outputs.
Designers select low-drift components to minimize this source of measurement error.
Thermal Design
Physical layout decisions on the printed circuit board affect how local heat sources interact with sensitive analog inputs. By isolating power regulators from precision ADC chips, engineers reduce the risk of non-linear thermal drift caused by localized heating. Thermal relief tracks and copper planes help to distribute heat evenly across the circuit board.
Engineers use thermal imaging and environmental chamber testing to verify that no hot spots develop during operation. This empirical verification is a standard part of the qualification process for any high-reliability aerospace or medical telemetry system.