Meaning
Mathematical adjustment of measured data to a common reference standard to remove systematic biases or environmental variations. Applying normalization allows for the direct comparison of results obtained under different conditions or with different instruments. It effectively resets the baseline of a measurement scale.
Reference Baseline
Calibration routines often start with the acquisition of a known signal to establish a zero-point. During normalization, the software divides the raw data by the reference data to produce a relative value. This step removes the frequency response characteristics of cables and adapters from the final plot.
Measurement Stability
Environmental shifts such as temperature changes can drift the gain of a test system over time. Periodic normalization corrections maintain the accuracy of long-term monitoring by accounting for these fluctuations. Without this correction, the data might show trends that are actually artifacts of the measurement setup rather than changes in the device under test.
Compliance Standard
Regulatory testing requires that all antennas and receivers are calibrated against a traceable source. The process of normalization ensures that a site in one location produces results equivalent to a site in another. It validates that the reported field strength is an absolute value independent of the specific hardware used for the scan.
This consistency is required for meeting global certification requirements. The final corrected data represents the true physical emission level of the product.