Meaning
Electrochemical cells require a voltage difference between the theoretical thermodynamic value and the actual potential needed to drive a reaction at a given rate. This excess voltage, known as overpotential, represents the extra energy required to overcome kinetic barriers on the electrode surfaces. It occurs in both batteries during charging and in electrolysers during hydrogen production.
The value increases non-linearly with the current density flowing through the system.
Kinetic Obstacle
The reaction rate at the electrode is limited by activation energy and mass transport limitations. Such overpotential is divided into activation, concentration and resistance components. While the activation component dominates at low currents where charge transfer is slow, the concentration component becomes prominent at high currents when the reactants cannot diffuse to the surface fast enough.
This diffusion limit represents a major bottleneck in rapid charging scenarios.
Energy Loss
The thermodynamic inefficiency directly converts electrical energy into waste heat. Such heating increases the temperature of the cell and accelerates the degradation of the active materials. To manage this thermal load, cooling systems must be integrated into the pack assembly.
Electrode Design
Catalysts are applied to the electrode surface to lower the activation energy. Such modification reduces the energy required to sustain the desired reaction rate.