Meaning
Maximum intensity of an electric or magnetic field measured at a specific distance from an intentional radiator defines the upper limit of exposure and interference potential. Calculation of peak field strength involves identifying the highest point in the radiation pattern during a full rotation of the device. This value is expressed in volts per metre or decibels relative to a microvolt per metre.
It represents the worst case scenario for electromagnetic compatibility. This value is often used to calculate the minimum safe distance for radio base stations where the field is highest directly in front of the antenna.
Measurement Method
Placement of a calibrated antenna at a distance of three or ten metres from the source allows for an accurate reading. The receiver records the peak field strength while the antenna height and the turntable angle are varied. This process captures the constructive interference from ground reflections and direct paths.
Safety Limit
Protection of human health and the environment depends on keeping the radiation levels below the thresholds set by international bodies. If the peak field strength exceeds these levels, the device must be modified or the user manual must specify a minimum separation distance. Regulators use this metric to determine the safety of wearable and handheld technology.
Distance Scaling
Conversion of measurements taken at a short distance to their equivalents at a further distance follows the inverse square law for electromagnetic radiation. When the peak field strength is known at three metres, engineers can predict the impact at the boundary of a restricted area. This extrapolation is valid only in the far field of the antenna.