Meaning
Physical blockage of microscopic electrolyte channels within porous battery separators or porous electrodes restricts ionic species transport during charge and discharge operations. During extended cycling, pore clogging caused by solid electrolyte interphase growth, lithium plating, or byproduct precipitation increases cell internal impedance and accelerates capacity fade. The reduction in active pore volume limits mass transport rates and creates non-uniform current density distributions across active material surfaces.
Preventing structural occlusion requires tailored electrolyte formulations and controlled charging profiles.
Degradation Pathway
Decomposition products formed during parasitic electrolyte reduction continuously deposit inside open separator pores and electrode interstitial voids. Over repeated charge cycles, pore clogging reduces tortuosity-corrected ionic conductivity, forcing lithium ions through narrower channels and raising concentration polarization. Low-temperature operation accelerates this degradation by encouraging localized metallic lithium plating at the anode interface, which rapidly seals surface pore entrances.
Over time, restricted ion flow creates localized hot spots and uneven state-of-charge distributions that promote micro-cracking within cathode active particles.
Thermal Consequence
Restricted ionic transport elevates cell internal resistance, causing higher operating temperatures under power demands. This additional thermal load accelerates secondary decomposition reactions, further speeding up channel occlusion in a self-reinforcing degradation loop.
Qualification Analysis
Post-mortem teardown procedures evaluate separator permeability using gas flow resistance measurements and scanning electron microscopy imaging. Qualification protocols flag cell designs showing rapid permeability drop-off during accelerated life testing, rejecting chemistry combinations that exhibit premature pore occlusion.