Meaning
Signal waveform alteration metrics characterize the generation of unwanted spurious frequencies and non-linearities in high-power transmitters. When input signals exceed the linear region of the amplifying component, power amplifier distortion introduces signal leakage into adjacent frequency bands and degrades overall modulation quality. This effect reduces the efficiency and range of wireless communication modules.
Nonlinear Behavior
At high signal levels, the amplifier enters compression where the output voltage no longer scales proportionally with the input. This compression creates harmonics and intermodulation products that interfere with neighboring channels. The resulting signal degradation makes it difficult for receivers to decode the transmission correctly.
Linearization Method
Engineers use compensation techniques to counter the non-linear effects of the active components. Digital predistortion modifies the input signal beforehand to cancel out the distortion that the amplifier will later introduce. This method allows the transmitter to run at higher power levels while remaining within strict spectrum emission limits.
A typical predistortion block uses feedback from the output to adjust its algorithm dynamically, which keeps the signal clean even as temperature and supply voltage change.
Product Qualification
During the final test phase, the transmission quality is measured using parameters like adjacent channel leakage ratio and error vector magnitude. These metrics confirm that the fully integrated module meets wireless standards and will not interfere with other devices. Passing these tests is necessary for the module to receive regulatory approval.