Meaning
Spatial scanning patterns over electronic assemblies assist in identifying localized areas of high electromagnetic emission. A pre-scan grid defines the coordinate points where an automated near-field probe measures the magnetic or electric field strength. This array of points covers the entire surface of the printed circuit board under test.
Engineers use this structured process to locate noise sources before formal compliance testing. The usefulness is limited to identifying relative emission hot-spots rather than absolute far-field values.
Resolution Selectivity
Probe step dimensions determine the time required to complete the electromagnetic evaluation of the board. A dense pre-scan grid captures fine details of trace emissions but increases the total duration of the test. Conversely, a sparse grid runs quickly but may miss localized sources of noise from tiny components.
Engineers must select the balance that fits their development schedule.
Data Interpretation
Visualization software generates a colored contour map from the collected spatial measurements. By overlaying the pre-scan grid results onto the board layout file, developers can trace noise directly to specific capacitors or inductors. This correlation helps target shield placements or trace rerouting.
It eliminates guesswork during the debugging phase.
Testing Sequence
This initial scan precedes any formal measurements in the anechoic chamber. It reduces laboratory costs by resolving issues early in the design cycle.