Meaning
Receiver sensitivity thresholds define the absolute minimum input signal power required for baseband circuitry to detect, synchronize with, and decode a transmission preamble sequence. Preambles consist of standardized pilot tones and training symbols that train automatic gain control, resolve carrier frequency offsets, and achieve symbol framing. If incoming signal strength drops below this preamble detection floor, the physical layer fails to recognize an incoming frame, treating the packet as background channel noise.
System operations cannot initiate payload demodulation regardless of error-correction capabilities.
Correlation Processing
In-phase and quadrature baseband digitizers feed raw signal samples into dedicated cross-correlation match filters. These hardware correlators match incoming samples against locally stored representations of short and long training sequences. Output correlation peaks rise above a programmed decision threshold only when the signal-to-noise ratio within the channel provides sufficient coherence.
High channel dispersion or internal phase jitter smears correlation peaks, lifting the effective power floor required for reliable synchronization.
Desensitization Mechanism
Integration of radio modules into finished products introduces parasitic noise that elevates the detection boundary. Switching regulators operating near the antenna front end, along with clock harmonics radiating from microprocessor buses, inject in-band interference directly into the receiver path. This desensitization shifts the baseline floor several decibels higher than the silicon vendor rating.
The degradation narrows the operational link radius, leading to dropped frames despite high transmit power from the link partner.
Acceptance Metric
Sensitivity characterization sheets quantify the correlation threshold across varying operating temperatures and supply voltages. Conducted bench testing measures packet delivery ratios while stepping RF input attenuation down until the receiver fails to assert carrier sense indicators. Handover documentation defines the margin between conducted sensitivity and radiated sensitivity measured in an anechoic chamber.
Elevated floor thresholds compromise reception long before data demodulation fails under clean continuous-wave conditions.