Meaning
The specific weave pattern of uncured fiberglass sheets determines the resin content and thickness of the laminate layers in a printed circuit board. Selecting the correct prepreg fabric style allows engineers to control the characteristic impedance of high-speed transmission lines. This selection affects both the manufacturing yield and the signal performance of the finished device.
Thickness Control
Lamination presses compress the uncured sheets, and each prepreg fabric style yields a specific thickness after curing. Thinner styles allow for the design of extremely thin boards but require more layers to achieve a desired overall board thickness. Designers calculate the cured thickness to ensure that the trace impedance matches the target value.
These calculations must account for the compression of the sheets during the high-pressure lamination cycle.
Resin Content
The open spaces within the woven fibers dictate how much resin the sheet can hold. High resin content styles fill the gaps around thick copper traces better but have a higher thermal expansion coefficient. This ratio is critical for preventing internal voids during board lamination.
Drilling Optimization
Coarser weaves degrade drill bits quickly, which leads to increased tooling wear and potential via misalignment. Fine styles allow for smoother drilling and cleaner via walls, which improves plating quality.