Meaning
Performance loss in the ability of an electronic circuit to suppress noise originating from the power supply lines is a significant concern for precision systems. Observed psrr degradation occurs when internal circuit imbalances or parasitic elements allow supply fluctuations to appear at the output terminal. This loss of rejection can turn a stable voltage reference or a clean amplifier output into a noisy signal.
Maintaining high rejection is critical for devices operating in environments with switching regulators or noisy battery supplies.
Frequency Response
Frequency-dependent paths through parasitic capacitances provide a bypass for noise at higher intervals. The onset of psrr degradation is typically more severe as the frequency of the supply noise increases. Capacitive coupling from the supply rail directly to the signal path overwhelms the active suppression capabilities of the transistors.
Design techniques like cascoding are used to increase the output impedance and extend the effective range of the rejection.
Balance Error
Variations in the manufacturing process lead to small differences between components that should be identical. Localized psrr degradation results when these mismatches prevent the cancellation of common-mode noise in differential circuits. Even a slight asymmetry in the layout or the transistor characteristics can significantly reduce the overall rejection ratio.
Precise matching and symmetrical layout patterns are required to minimize the impact of process variations.
Integrity Failure
High noise levels on the output signal lead to errors in data conversion or distortion in wireless communications. Severe psrr degradation forces designers to use additional external filtering components which increases the size and cost of the final product. The loss of performance can render a sensitive sensor interface unusable in a real-world application.
Measuring the rejection ratio across the entire operating frequency range is a standard part of the component qualification process. It determines the compatibility of the chip with specific power delivery architectures. The reliability of the signal chain depends on the stability of the power supply rejection over time and temperature.