Meaning
Electromagnetic compatibility standards restrict the amount of unintended radio frequency energy that electronic devices can emit into the surrounding environment. The specific limit curve known as a radiated emission mask defines the maximum permissible power levels across a broad spectrum of frequencies. This restriction ensures that different electronic assemblies can operate in close proximity without causing mutual interference.
Regulatory Boundary
Different frequency bands are governed by distinct regulatory levels depending on the proximity of sensitive communication services. A radiated emission mask typically allows higher emissions within the designated operating band of the sensor but drops sharply outside it to protect adjacent channels. Compliance with these limits is mandatory for receiving market certification.
Test Verification
Verifying that a product complies with electromagnetic limits requires structured testing within an anechoic chamber. Technicians measure the electromagnetic field strength across the specified frequency range and plot the results against the radiated emission mask. If any measured peak exceeds the curve of the mask, the product fails certification and cannot be sold.
This measurement must account for different antenna polarizations and sensor operating modes to capture the worst-case emissions. Precise test equipment ensures that any spurs or harmonics generated by high-speed digital clocks are detected.
Mitigation Strategy
Suppressing unwanted high-frequency noise involves a combination of shielding and filtering. When a design exceeds the radiated emission mask, engineers often add decoupling capacitors near active components or modify the ground plane routing. These changes block the paths through which high-frequency currents can reach external structures and radiate into space.