Meaning
Transmission strategies involve the repeated sending of the same information across multiple consecutive subframes to improve the probability of successful reception. Implementation of repetition schedules allows low power devices to communicate from deep indoors or underground locations where signal levels are extremely weak. Each copy of the data adds to the total energy received by the base station.
Signal Reliability
Integration of multiple received versions of a packet through soft combining increases the signal to noise ratio. Although the individual transmissions might be below the noise floor, the aggregate signal from repetition schedules often crosses the threshold for successful decoding. This mechanism is the primary tool for achieving the coverage targets of narrowband iot networks.
Latency Penalty
Occupancy of the radio channel increases proportionally with the number of repetitions used for a single message. Because the device must stay active for a longer duration, repetition schedules introduce a delay in data delivery and reduce the overall capacity of the cell. Engineers must trade off the need for deep coverage against the requirement for timely updates.
This scheduling overhead limits the density of sensors in a single sector.
Timing Control
Consumption of energy per bit rises significantly when the system relies on high repetition counts. Optimization of the reporting interval helps mitigate the impact of these extended transmission times.