Meaning
Optical coordinate measurement systems utilize high contrast markers to trace critical physical locations on an assembly line fixture. The retroreflective targets reflect incoming light directly back to the camera source with minimal scattering, creating highly bright points in the captured images. This optical property allows the photogrammetry software to locate the target center with sub millimetre accuracy even in variable factory lighting.
They are adhered to the surface of the device enclosure during the antenna pattern test phase.
Optical Function
Each marker consists of a substrate coated with microscopic glass beads or microprisms that bend and return the light path. When the ring flash mounted on the camera lens fires, the retroreflective targets send the illumination back along the same vector. This retroreflection makes the markers appear as highly bright, high contrast circles against a dark background in the image.
The software uses a center of gravity algorithm to determine the coordinates of the circle center to within a fraction of a pixel.
Application Protocol
The placement of the markers requires a clean, non textured surface. Technicians use isopropyl alcohol wipes to prepare the attachment areas before placing the adhesive backed circles.
Accuracy Enhancement
Using these markers reduces the measurement noise by a factor of ten compared to using natural features of the metal housing. This improvement allows the system to verify the antenna bracket location to the demanding standards required for high frequency wireless transmission.