Meaning
Specialized electronic verification confirms the performance of silicon chips that process wireless signals for mobile and satellite communication. The process of rfic testing involves measuring parameters such as gain, noise figure, and linearity at frequencies ranging from hundreds of megahertz to several gigahertz. It requires a controlled environment to prevent external interference from affecting the results.
Frequency Response
Gain flatness across the operating band indicates the ability of the chip to process signals uniformly. During rfic testing, the system sweeps through a range of frequencies to identify any resonances or unexpected drops in signal strength. Discrepancies in the frequency response often point to parasitic capacitance or inductance within the package.
High resolution traces on the test board are designed to match the characteristic impedance of the device pins.
Test Environment
Isolation from outside electromagnetic radiation is achieved through the use of shielded enclosures and filtered power lines. Any stray signal that leaks into the rfic testing setup can appear as noise and lead to a false failure of the noise figure specification. Proper grounding of the test socket is also necessary to maintain signal purity.
Technicians verify the isolation level of the chamber before starting a high volume production run.
Automated Execution
Software controllers coordinate the movement of parts through the test cell and the configuration of the measurement equipment. Rapid rfic testing is necessary to keep the cost per unit low in the competitive consumer electronics market. Multi-site testing allows the system to evaluate four or eight chips simultaneously, which significantly increases the hourly output of the factory.
Automated handlers use vacuum pickups to move the tiny packages into the test sockets without causing physical damage to the delicate leads.