Meaning
A transmission configuration ensures reliable delivery of data packets across a cellular radio interface. The rlc am mode uses bidirectional signaling to verify that every transmitted block is correctly received. It triggers retransmissions for any packets that are lost or corrupted during wireless propagation.
Reassembly Process
Data blocks are received out of order when physical layer retransmissions occur. In rlc am mode, the receiving stack buffers these blocks and rearranges them into the correct sequence. The stack only passes completed service data units to the higher protocol layer.
Feedback Mechanism
Receivers periodically inform transmitters about the status of incoming blocks using status reports. When utilizing rlc am mode, the receiver sends a bitmap that indicates which sequence numbers have arrived and which are missing. This feedback allows the transmitter to release memory buffers holding successfully received packets.
Buffer Control
Memory allocation in embedded cellular modules must handle fluctuations in signal quality. Under rlc am mode, the transmitter must retain sent packets in its buffer until it receives positive confirmation from the receiver. If the wireless link degrades, the buffer can fill up quickly, which forces the module to throttle its local application data rate.
Engineers must select memory limits that prevent buffer overflows while maintaining throughput under poor signal conditions.