Meaning
Standardized exposure procedures divide measured localized specific absorption rate values by the applicable regulatory limit to assess user exposure against compliance thresholds for portable transmitting devices. The sar ratio calculation determines whether an individual radio or a combination of concurrent transmitters operating within twenty centimeters of the human body complies with regional radiofrequency safety guidelines. This numerical ratio standardizes localized tissue heating measurements, establishing equivalence across divergent frequency bands and averaging masses.
The evaluation stops applying to fixed infrastructure installations, vehicular transmitters or portable products where the total radiated power remains beneath regulatory exemption limits.
Calculation Workflow
Compliance assessment begins by scanning a physical phantom filled with tissue-simulating liquid using calibrated electric field probes during continuous maximum-power device transmission. The highest spatial absorption recorded over a one-gram or ten-gram cubical tissue mass is divided directly by the statutory regulatory ceiling to generate the individual exposure ratio. In host enclosures housing multiple simultaneous radios, the individual fractions for each active transmitter are summed to derive the combined aggregate ratio.
When the sum of these peak ratios exceeds unity, multi-transmitter compliance requires detailed volume-scanned spatial peak evaluations to determine whether individual heating distributions overlap inside the phantom.
Spatial Summation
Physical separation between transmitting antennas within a handheld terminal prevents peak specific absorption rate hotspots from aligning directly in adjacent tissue. The SAR-to-peak-location separation ratio assesses the physical distance between the highest localized absorption coordinates of two co-located antennas against their combined numerical absorption levels. If the calculated separation ratio remains below regulatory thresholds, the transmitters are considered compliant without demanding full volumetric phantom scans.
When high-power antennas sit immediately adjacent to each other, combined physical tissue scans become mandatory to map direct absorption overlap.
Handover Deliverables
Final regulatory test reports log individual peak absorption figures, phantom liquid dielectric properties, probe calibration certificates and the completed sar ratio calculation matrix. Equipment certification files require these signed calculations to demonstrate that peak continuous transmission parameters will not subject end-users to non-compliant radiofrequency tissue heating.