Meaning
Measurement method that uses the interference patterns of light to map the topography of a surface with high precision. By projecting a coherent light source onto a target and observing the fringes created by the interaction of the reference beam and the reflected beam, the system determines height variations. In the production of smart devices, shadow interferometry is used to verify the flatness of substrates and the alignment of optical sub-assemblies.
The technique stops being effective when the surface roughness is high enough to scatter the light or when the surface is completely transparent.
Fringe Analysis
Translation of visual interference patterns into numerical data requires sophisticated image processing algorithms. These programs calculate the phase shift of the light across the surface to build a three-dimensional map of the part. This allows for the detection of micron-scale warpage that would be invisible to the naked eye.
If the fringe density becomes too high, the system may struggle to resolve individual lines, limiting the maximum measurable slope.
Surface Calibration
Accuracy of the measurement depends on the stability of the reference flat and the wavelength of the light source. Regular calibration against a known standard ensures that the data remains consistent over time. This process is necessary for maintaining the quality of high-volume manufacturing lines where small drifts in tool alignment can lead to batch rejections.
The use of multiple wavelengths can extend the dynamic range of the system, allowing it to measure larger height steps without losing precision.
Inspection Speed
Rapid data acquisition makes this method suitable for inline quality control. A single scan can capture the entire surface profile of a chip or a small board in seconds.