Meaning
Relative change in the dimensions of a material or assembly resulting from a change in temperature. It is calculated as the product of the coefficient of thermal expansion and the temperature difference. In the integration of electronic modules, thermal strain is the primary driver of mechanical failure in solder joints and adhesives.
The metric stops being a simple linear calculation when the material enters the plastic deformation regime or when it undergoes a phase transition.
Mechanical Conflict
Stresses arise when two materials with different expansion coefficients are bonded together. If one part expands more than the other, the interface must accommodate the difference through elastic or plastic deformation. This conflict is especially dangerous in the connection between a ceramic chip and a plastic circuit board.
Over repeated cycles, the accumulated thermal strain leads to the initiation and growth of cracks in the interconnects.
Mitigation Strategy
Designers reduce the impact of these forces by selecting materials with matched expansion rates or by introducing compliant buffers. Underfill resins are often used in flip-chip packages to distribute the load across the entire surface of the die rather than concentrating it on the solder bumps. This approach effectively lowers the peak strain at the most vulnerable points.
Flexible circuit designs take another path by allowing the entire assembly to bend and move, thereby relieving the pressure on individual components.
Reliability Prediction
Mathematical models use these strain values to estimate the time until a device fails. By simulating thousands of thermal cycles, engineers can identify potential weak points before the first prototype is built.