Meaning
Electromagnetic emissions from high-frequency switching regulators can couple into nearby wireless receivers, reducing their operating sensitivity. This specific form of receiver degradation is known as smps desense, where the switching noise floor overlaps with the radio frequency channels. The occurrence of smps desense is a common challenge in compact designs where the power supply is located close to the antenna.
In mobile devices, this noise must be managed to maintain reliable cell signal reception.
Noise Sources
The fast voltage and current transitions of the switching transistor generate high-frequency harmonics that extend into the megahertz or gigahertz range. These harmonics cause smps desense when they propagate through power traces or couple capacitively to the antenna feed line. The switching frequency of the regulator determines the spacing of these noise spurs.
Diagnosis Method
Identifying this noise coupling requires measuring the receiver sensitivity while dynamically changing the switching frequency of the regulator. If the sensitivity peaks and nulls shift along with the switching frequency, this confirms the presence of smps desense. Engineers use spectrum analyzers to locate the specific hot spots on the board.
Mitigation Strategy
Shielding the regulator circuit and routing its traces on internal board layers help contain the switching noise. Applying high-frequency decoupling capacitors and ferrite beads to the regulator input and output lines prevents smps desense by filtering out the harmonics before they can propagate. Shifting the switching frequency can also move the noise spurs out of the active wireless channels.