Meaning
Signal analysis parameters define the selective filtering capability used to isolate and measure individual frequency components in a radio signal. Selecting the correct spectrum analyzer bandwidth is necessary to distinguish closely spaced signals and accurately measure noise. This setting includes resolution and video bandwidth filters.
Resolution Tradeoff
Frequency resolution is directly tied to the width of the bandpass filter used in the measurement path. A narrower filter provides better resolution and allows closely spaced signals to be measured individually, but it increases the time required to complete the frequency sweep. If the filter is too wide, the signals merge together on the display and the measurement loses detail.
This tradeoff requires developers to choose a filter that balances sweep speed with the required resolution.
Sweep Operation
Measurement speed of the analyzer must be carefully adjusted when using narrow filter settings to prevent measurement errors. If the analyzer sweeps across the frequency range too quickly, the filter does not have enough time to respond and the signal amplitude will be displayed incorrectly. Modern analyzers automatically adjust the sweep time based on the selected resolution bandwidth to ensure accurate results.
This adjustment prevents amplitude errors and protects the integrity of the data.
Dynamic Measurement
Sensitivity of the instrument improves when the filter width is reduced, as this lowers the displayed average noise level. This allows very weak spurious signals to be detected and measured during regulatory compliance testing. If the noise floor is too high, these emissions can be masked, which could lead to a false pass result.
Selecting the correct spectrum analyzer bandwidth ensures that all emissions are measured accurately and that the device complies with the relevant regulatory standards.