Meaning
Partitioning of a conductive plane into discrete sections to control return currents. A split ground commonly divides analog and digital regions to shield sensitive low-voltage signals from the high-frequency switching noise of digital processors. This technique relies on controlling the return paths of currents to ensure that noisy signals do not share a common conductor with quiet ones.
Current Partitioning
Designers must carefully place components and traces to ensure that signals do not cross the gap between the isolated planes. When a signal trace passes over a split ground, it creates a large inductive loop that generates electromagnetic interference and degrades signal integrity. Bridges or specific components like ferrites connect the planes at a single point to provide a common reference without allowing noise to propagate freely.
Layout Specification
Layout files define the physical width and location of the gap to meet the dielectric breakdown and capacitance requirements of the design. The effectiveness of a split ground is validated during electromagnetic compatibility testing where the radiated and conducted noise levels are measured. Proper implementation reduces the noise floor of analog to digital converters and improves the performance of radio frequency front ends.
Design Failure
Improper routing across the gap often negates the benefits of the isolation and creates more problems than a solid plane.