Meaning
Destructive semiconductor metrology uses point-contact probe resistance measurements along an angled cross-section to determine active carrier concentration gradients as a function of depth through doped semiconductor layers. Spreading resistance profiling evaluates junction depths, channel doping distributions, epitaxial layer boundaries, and transition zones beneath diffusion barriers. The technique measures mobile carrier densities across beveled silicon or silicon carbide specimens, stopping where insulating layers, wide bandgap dielectrics, or fully isolated packaging structures prevent direct electrical probe contact.
Sample Preparation
Mechanical beveling of silicon test samples forms the initial step in obtaining high-resolution physical depth data. A precisely machined angle, often less than one degree, expands narrow subsurface dopant layers into a wider surface plane measurable by micropositioning probes. During spreading resistance profiling, two closely spaced, hard tungsten carbide or osmium alloy probes step along the beveled bevel edge in uniform sub-micron increments.
Direct electrical resistance recorded between the probe tips corresponds directly to local material resistivity through calibrated contact-mechanics algorithms.
Dopant Calibration
Carrier concentration extraction depends on converting raw measured resistance through empirical calibration curves. Because spreading resistance profiling responds only to electrically activated dopant atoms rather than total physical atom counts, its output diverges from secondary ion mass spectrometry profiles that capture inactive atoms. Calibration samples with certified uniform resistivity values calibrate the probe contact resistance across diverse surface conditions.
Mathematical deconvolution software corrects for substrate thickness, carrier spillover across steep transitions, and probe penetration variations. The analytical result yields a continuous active carrier concentration profile across the complete processed depth.
Process Handover
Silicon foundry lines use depth metrology results to qualify thermal diffusion furnaces, ion implantation systems, and epitaxial growth chambers. Fabrication pass reports cross-check spreading resistance profiling curves against device simulation boundaries to verify channel depth targets before releasing processed wafer lots to metallization. Quality engineers isolate anomalies such as autodoping, out-diffusion from buried layers, and junction placement errors through these depth-profile traces.
Semiconductor foundry sign-off dossiers rely on accurate junction depth metrics to guarantee matching transconductance figures across production batches. Yield stability remains tied to junction placement accuracy verified by contact depth metrology.