Meaning
Unwanted signal components appear at integer multiples of the fundamental frequency due to nonlinearities in the signal processing chain. The presence of spurious harmonic distortion indicates that the circuit is adding frequencies to the signal that were not present at the input. These artifacts can interfere with adjacent communication channels or degrade the clarity of the processed information.
Managing this distortion is a primary goal in the design of high-fidelity audio and radio frequency equipment.
Nonlinear Source
Signal compression and clipping occur when the input amplitude exceeds the linear operating range of the active devices. In many amplifiers, spurious harmonic distortion is generated by the nonlinear relationship between the input voltage and the output current. The gain of the circuit changes throughout the signal cycle and creates a deformed waveform.
Designers use negative feedback and biasing techniques to linearize the response and reduce the production of harmonics.
Spectral Content
Secondary and tertiary peaks in the frequency spectrum represent the most significant contributors to the total signal corruption. Large amounts of spurious harmonic distortion can mask weak signals that are close in frequency to the harmonics. This spectral regrowth is particularly problematic in wideband communication systems where it causes inter-channel interference.
Filtering at the output stage can remove some harmonics but does not address the underlying nonlinearity of the circuit.
Testing Protocol
Characterization of the distortion level involves applying a pure sine wave to the input and measuring the power of the harmonics at the output. Engineers quantify spurious harmonic distortion by calculating the ratio between the power of the unwanted harmonics and the power of the fundamental signal. This measurement is typically expressed in decibels relative to the carrier or as a percentage of the total signal.
Standard test conditions ensure that the performance of different devices can be compared accurately. The analysis covers multiple power levels to determine the dynamic range of the linear operation. Automated test equipment sweeps the input frequency to identify any resonant points where distortion increases.
Final product specifications include the maximum allowable harmonic levels for certification.