Meaning
Automated spectrum analyzer measurement sequences scan wide frequency ranges to detect unwanted radio frequency emissions outside designated channel allocations. Electromagnetic compliance procedures mandate a spurious sweep to uncover parasitic oscillations and clock harmonics generated by active radio circuitry. Spectrum analyzers run stepped or swept frequency scans across frequencies up to forty gigahertz to ensure emissions remain below regulatory thresholds.
Identifying unexpected emissions early prevents costly re-certification failures and radio interference issues.
Frequency Range
Regulatory standards define lower and upper frequency boundaries for spurious emission testing based on the highest clock frequency inside the device. Executing a spurious sweep requires calibrating spectrum analyzer resolution bandwidths and sweep speeds to ensure narrow signal spikes are captured. Test receivers use peak detector modes to rapidly flag suspicious frequencies before performing slower quasi-peak or average measurements on flagged frequencies.
Spur Identification
Harmonics of switching power regulators and digital processor clocks create discrete narrow-band emission peaks. Comparing flagged spurs against known clock sources pinpoints the physical noise generator.
Filter Attenuation
Suppressing unwanted emissions requires placing bandpass filters at transmitter outputs and filtering DC power lines. System designers use spurious sweep data to size RF absorption shields and tune PCB stub filters. Effective suppression attenuates parasitic emissions below regulatory limits across operating temperature ranges.
Test reports record peak spur levels and frequencies as proof of compliance prior to commercial product distribution.