Meaning
Wireless devices operating in the Chinese market must meet national safety standards for human exposure to electromagnetic radiation. This specific regulation, designated as SRRC GB 21288, defines the limits and measurement methods for the specific absorption rate of mobile phones and other terminal products. Compliance with this standard is mandatory to receive the State Radio Regulation of China certification required for any wireless transmitter.
Technical Requirement
The technical requirements under SRRC GB 21288 specify the maximum allowed power absorption in the head and body. Laboratory technicians use automated phantoms to measure these values while the transmitter operates at its highest rated power. If a device exceeds the limits, it cannot be legally imported or sold in China.
Manufacturers must design their antenna assemblies and adjust their software power tables to comply with these restrictions. This process often involves tuning the proximity sensor behavior to decrease the RF output whenever the device is held next to the user’s head.
Module Inspection
For multi-band smart devices, the testing covers all supported frequencies, including cellular and local area networks. Software-defined power limits must be programmed into the firmware to reduce transmitting power when the device is close to the body. This sensor-driven reduction must function reliably and without user intervention to pass the regulatory audit.
Failure to pass can cause the entire product launch to be suspended in the region.
Customs Clearance
Once the compliance is certified, the product is assigned an official SRRC ID that must be printed on the regulatory label. Customs officials in Chinese ports check these codes against the national database before releasing shipments. Without a valid ID, the shipment is seized and returned to the manufacturer.
This enforcement ensures that all consumer electronics sold in the country conform to the required electromagnetic safety levels.