Meaning
Non-linear friction behavior characterized by a cycle of sticking and slipping between two sliding surfaces. In the mechanical tuning of radio frequency filters, stick slip hysteresis causes small movements instead of a smooth adjustment. This effect occurs when the static friction between the parts is higher than the kinetic friction.
The resulting position error makes it difficult to reach the exact frequency required by the system specification.
Friction Cycle
Energy builds up in the elastic members of the system while the surfaces are stuck. Once the applied force exceeds the static limit, the parts jump forward, and the cycle of stick slip hysteresis repeats. This creates high-frequency vibrations that can be heard as a squeak or felt as a shudder.
Lubricants are often applied to the interface to narrow the difference between the two friction coefficients.
Control Challenge
Software loops for motorized actuators must be tuned to handle these sudden jumps. If the stick slip hysteresis is not managed, the system may oscillate around the target position. High-resolution encoders are required to detect the microscopic slips that occur during fine positioning.
Design teams choose material pairs, such as PTFE and polished steel, to minimize this behavior.
System Impact
Precision and longevity are the main casualties of uncontrolled friction cycles. Wear particles generated during the slip phase can contaminate the surrounding electronics. The stick slip hysteresis remains a factor as long as the surfaces remain in contact under a normal load.
Engineers specify the minimum surface finish and the type of grease on the assembly drawing to ensure consistent performance.