Meaning
High-frequency electromagnetic interference generated by the rapid switching of power transistors in a power supply circuit degrades the performance of nearby sensitive electronic components. This signal distortion, known as switched-mode noise, consists of both conducted and radiated emissions. It originates from the steep voltage and current transitions during the switching cycle.
The frequency spectrum of this noise extends up to several megahertz.
Generation Mechanism
The rapid switching of current through parasitic inductances and capacitances generates high-voltage spikes and ringing. These transients are the primary source of the high-frequency noise. The amplitude of these spikes depends on the switching speed and the circuit layout.
Designing with soft-switching topologies can reduce the severity of these transients.
Propagation Path
Noise propagates through both conducted and radiated paths to affect other parts of the system. Conducted noise travels along power and ground lines, while radiated noise is emitted directly from the circuit traces.
Mitigation Method
Engineers use low-pass filters, shielding, and careful PCB layout to reduce the propagation of this noise. Decoupling capacitors are placed close to the noise source to provide a local path for high-frequency currents. These measures are validated through emissions testing in a compliance laboratory to ensure that the product meets regulatory standards.
Effective mitigation prevents the noise from disrupting the operation of sensitive radio components.