Meaning
Active semiconductor output circuitry switches test data output pins into a high-impedance state to prevent bus contention on shared scan response lines. Incorporating a TDO tri state driver allows multiple integrated circuits to share a single TDO return net back to the test controller. In IEEE 1149.1 boundary scan architectures, the TDO pin outputs serial data only during Shift-DR or Shift-IR controller states.
At all other times, the internal driver enters a high-impedance state, disconnecting the pin electrically from the bus. The scope of a TDO tri state driver covers the physical interface output stage of boundary scan compliant silicon, ending at the external board net connection.
Bus Contention
Without high-impedance state control, driving devices would fight for bus dominance, causing signal distortion and elevated supply currents. The TDO tri state driver disables its pull-up and pull-down transistors whenever the TAP controller leaves active shift states. Safe multiplexing relies on precise timing of driver enable signals.
Hardware Verification
Parametric testing validates leakage currents of the driver while in its high-impedance state.
Design Compliance
Silicon vendor datasheets specify maximum TDO driver disable times to prevent overlap during device switching. Integration engineers verify bus turnaround timing during hardware acceptance testing to confirm signal integrity across all operating temperature ranges.