Meaning
Wear caused by repeated expansion and contraction of contact surfaces during temperature cycles. Thermal fretting occurs at the interface of connectors, solder joints, traces, or pins where different materials have mismatched coefficients of expansion. The resulting microscopic movements lead to the removal of protective plating and the oxidation of the underlying metal.
This process increases the contact resistance and can eventually lead to an open circuit or intermittent failure in a smart device.
Surface Oxidation
Material debris accumulates between the mating surfaces as the movement continues. Thermal fretting exposes the base metal to the atmosphere, where it quickly forms a non-conductive oxide layer. Each subsequent temperature cycle grinds this oxide into the contact area, further degrading the electrical path.
To prevent this, manufacturers often use lubricants or noble metal coatings like gold that do not oxidize. The increase in resistance generates additional heat, which can accelerate the wear process in a feedback loop. This damage is often invisible to the naked eye and requires microscopic analysis to detect.
Mechanical Housing
Physical design and mounting techniques influence the severity of the wear. When a connectivity module is tightly constrained, the internal stresses generated by heat have no way to dissipate except at the connector pins. Using compliant pins or specialized lubricants can reduce the impact of thermal fretting.
Designers also select materials with similar expansion properties to minimize the relative motion at critical junctions.
Reliability Assessment
Accelerated life cycles in a climate chamber are used to predict the onset of this failure mode. Engineers monitor the resistance of a junction while swinging the temperature between extremes to observe the effects of thermal fretting. A stable resistance reading over several hundred cycles indicates a robust mechanical design.
The final qualification of a product often depends on its ability to withstand these stresses in harsh industrial environments.