Meaning
Reduction of internal mechanical stresses in materials occurs as a result of plastic flow or localized deformation when the assembly is exposed to elevated temperatures. This behavior, known as thermal strain relaxation, reduces the risk of sudden mechanical fractures in complex electronic boards. It allows the printed circuit board and the attached components to adjust to the stresses caused by mismatched thermal expansion coefficients.
Stress Mitigation
Controlled cooling cycles and baking processes are applied to the assembled hardware to encourage this gradual stress reduction. When thermal strain relaxation occurs, the risk of solder joint cracking during subsequent operation is significantly reduced. This step is especially critical for large grid array packages that sit on thin substrate boards.
Material Behavior
Microscopic adjustments in the crystal lattice of solder alloys absorb the strain that would otherwise propagate through the component leads. Monitoring thermal strain relaxation provides insight into the long-term durability of the interface materials under cyclic thermal loads. This analysis helps in selecting the correct adhesive and solder chemistries for harsh environments.
Process Constraint
Excessive heat exposure during this relaxation process can damage sensitive components or cause delamination of the substrate. The thermal profile must be balanced to reduce strain without compromising the integrity of the device.